Anquamine - Description
Anquamine curing agents are modified amines capable of emulsifying and curing epoxy resins at room temperature. They are used in aqueous and low VOC formulations.
More information about Anquamine
Anquamine 401: Waterborne curing agent which is a modified aliphatic amine supplied at 70% solids in water. It is intended for use with Liquid Epoxy Resin (EEW=190) and waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. It can also be utilized with different types of epoxy resin depending upon the properties desired.
Anquamine 419: Waterborne curing agent which is a modified aliphatic amine supplied at 60% solids in water and methoxy propanol. It is intended for use with waterborne epoxy dispersions in two-component, ambient-cure, waterborne epoxy coatings. Anquamine 419 curing agent delivers excellent properties in anticorrosive primers, white gloss enamels and clear coats. It can be used with different solid epoxy resin dispersions depending upon the properties desired.
Anquamine 670: Anquamine® 670 curing agent is a low viscosity modified amine adduct dissolved in water. The epoxy curing agent has the ability to emulsify liquid epoxy resins and the resultant, emulsified system is ideal for use in water based epoxy coatings.
Anquamine 701: Water-based epoxy curing agent that lets formulators create unique microporous systems that are breathable and water vapor permeable preventing delamination and blistering. This means floors can be laid and returned to service quickly, without the extra costs involved with reducing moisture content of the concrete. It is based on a polymeric emulsion and, as a result, provides superior performance for a wide range of applications. It has been developed primarily for use with liquid epoxy resins, out-performing solid resin emulsion-based systems by offering the capability to formulate systems with zero VOC and without resin emulsifiers.
Anquamine 721: Waterborne curing agent is a modified amine curing agent designed for use in waterborne epoxy coatings where cost effectiveness and high performance are key requirements. It can be formulated to low or zero VOC. It offers good pot life, good dry speed, and good emulsion stability even at low solids. Cured coatings exhibit high gloss, a balance of hardness and flexibility, and very good adhesion to concrete.
Anquamine 728: Anquamine® 728 is a waterborne amine curing agent for use in concrete epoxy primers and topcoats that delivers fast backin- service next day under adverse cure conditions (10˚C and 60-85% RH). The product can be used with Ancarez® AR-555 solid epoxy resin dispersion to facilitate 1-day floor installation (primer/topcoat) with next day walk-on. Coatings based on Anquamine® 728 can be applied upto 500 g/m2 with minimal impact on cure speed.
Anquamine 731: Anquamine® 731 is a water-based curing agent is specifically designed for a standard liquid epoxy resin. It is specifically designed for costeffective high-film build concrete coatings. It is particularly suitable for water-based self-leveling systems. Anquamine 731 curing agent easily emulsifies Standard liquid epoxy resins without the need for emulsifiable or pre-emulsified epoxy resins.
Anquamine 735: Water-based curing agent specifically designed for standard liquid epoxy resin. It is a cost-effective material for high-film build concrete coatings and is particularly suitable for water-based self-leveling systems. It can easily emulsify standard liquid epoxy resins without the need for emulsifiers or pre-emulsified epoxy resins. Formulations based on Anquamine 735 curing agent enable highly decorative functional floors without the requirement of plasticizers or solvents.
Epilink 360: Modified polyamide curing agent designed for use with liquid epoxy resins in two-component, ambient-cure, waterborne epoxy coatings. It is supplied at 50% solids in water, allowing for the formulation of very low or zero-VOC epoxy coatings with handling and performance properties typical of solvent borne formulations.